Data set for "Design, optimisation and operation of a high power thermomagnetic harvester"

The data set for the article [Bahl, C. R., Engelbrecht, K., Gideon, A., Levy, M. A. V., Marcussen, J. B., Imbaquingo, C., & Bjørk, R. (2024). Design, optimization and operation of a high power thermomagnetic harvester. Applied Energy, 376, 124304.]. DOI for the publication: 10.1016/j.apenergy.2024.124304

The data are stored in four zip files, each containing a single folder, according to the different sections in the paper.

The folder "Simulation_design" contains three Origin plot files, which contains the data for Figs. 3-5, Fig. 6 and Fig. 7. Both plots and data are contained in the Origin files.

The folder "Experiment_thin_coils" contains an Origin file with the data and plot for Fig. 9. Furthermore it contains Matlab scripts for plotting Fig. 10 and Fig. 11 as well as the supporting file "lvm_import.m" for importing the lvm files which contains the raw experimental data. The RMS voltage plotted in Fig. 11 is given in the file "Voltage_RMS.txt".

The folder "Experiment_big_coils" contains an Excel sheet with the data shown in Fig. 13, as well as the raw data, Raw_data.xslx, from the experiments needed to produce the average data in the Fig_13_data.xslx file. The data is described within the Excel files.

The folder "Experiment_big_coils" contains the raw data in lvm format for the experiments with and without foam. The files are named according to the frequency, flow rate and temperature span and can be read with the "lvm_import.m" file in Matlab.